iStream AIO IACU1 Dante USB IO 2×2 Dante – USB Adapter
The iStream AIO IACU1 USB adapter for Dante supports 2×2 channels of 24-bit / 48 kHz bidirectional audio, It is easy to use with two-way channel signal transmission from USB signal input to Dante, or signal output from Dante to USB.
- Connect your computer to Dante network
- 2×2 Channels Bidirectional Audio
- Plug-and-Play Operation
€ 199,00
9 in stock (can be backordered)
- Ordered before 4PM same day shipping
- FREE shipping within EU
- Pricing Ex VAT
iStream AIO IACU1 Dante USB IO 2×2 Dante – USB Adapter
The iStream AIO IACU1 USB adapter for Dante supports 2×2 channels of 24-bit / 48 kHz bidirectional audio, It is easy to use with two-way channel signal transmission from USB signal input to Dante, or signal output from Dante to USB.
The iStream Dante USB Type-A adapter is auto-discovered and ready to use when connected, no separate power supplies are required, just use USB power and the adapter is ready to go.
KEY FEATURES
- Cost-effective solution to connect your computer to Dante network
- 2×2 Bidirectional Audio
- Plug-and-play operation
- Powered by USB
- Replaces multiple analog or multi-core cables with only a network cable
- Compact design, easy to use
- Sample rates up to 48 kHz
- Extends uncompressed high-quality audio signal with near-zero latency
- Wide dynamic range
- High signal-to-noise ratio
- RJ45 and USB Type-A Connectors
- Compatible with Dante Domain Manager (DDM)
APPLICATIONS
- Connect Computer to a Dante network
- Connect your Streaming Gear to a Dante network
SPECIFICATIONS
iStream | |
Model | AIO IACU1 |
RJ45 Port | 1 |
Connection | RJ45 and USB A type |
Power supply | USB |
Sampling Rate | 48kHz |
Network transmission | Dante IP AES67 RTP Audio |
USB | USB2.0 |
Operating Temparature | 0-40C |
Size | 652mm x 32mm x 22mm |
Weight | 0.2kg |
Input & Output | Â 2 Channels |
SETUP
- Download and install the Dante controller from audinate websiteÂ
- Connect the device to the switch using the Dante network with a network cable
- Connect your computer through the USB interface
- Search for devices in Dante controller software, and select your device to configure
- On the routing page match input with output column
- Once setup and configured your iStream Dante audio device will remember and save the settings
INCLUDED BY DEFAULT
- iStream AIO IACU1 Dante USB IO 2×2 Adapter