Lumantek BAT-SD 1×6 HD/SD-SDI Distributor

Lumantek BAT-SD 1×6 HD/SD-SDI Distributor

With its size of a mini converter, the BAT Distributor can take in 1 video source and multiply it by 6 output channels. It functions with SD/HD/3G-SDI resolutions with 2 watts of power consumption.

 

 

KEY FEATURES 

1 to 6 Video Distribution

With BAT Distributor, you can multiply your video 6 times. This configuration is perfect when you need to send the same video signal to many monitors.ch’

Re-Clocking and Amplification

Video signals going through BAT Distributor are amplified and sent out. Meaning, the signals can reach further cable distances from where the BAT Distributor is positioned.

Low Power Consumption

BAT Distributor operates with 2 watts of power making the maximum heat produced to be 50 degrees Celcius.

SPECIFICATIONS

Input
Parameter	Units	Min.	Typ.	Max
SDI Input Cable Lengths
SD-SDI (Belden 1694A)	250		m
HD-SDI (Belden 1694A)	170		m
3G-SDI (Belden 1694A)	155		m
RF Input
Connector (1port)	75 Ohm, 1 x BNC type female
Display
Input SDI Detect	SD(Green), HD,3G (Yellow)

 

Output
Parameter		Min.	Max.	Units	Typ.
Rise/Fall time	SD-SDI: rise/fall time (20-80%)			ps	600
	HD-SDI: rise/fall time (20-80%)			ps	100
	3G-SDI: rise/fall time (20-80%)			ps	100
Peck to Peck Voltage Swing	SD/ HD/ 3G-SDI	720	880	mVpp	800
Overshoot / Undershoot	SD/ HD/ 3G-SDI	-10	+10	%
RF Input	Connector (1port)	75ohm, 1 x BNC type female

 

Power
Parameter	Min.	Max.	Units	Typ.
DC Input Power	7	18	V
Lowest Power Consumption		2	W
Dimensions	131 x 99 x 28.4 (except connector )mm
Weight	370g

INCLUDED BY DEFAULT

• Lumantek BAT-SD 1×6 HD/SD-SDI Distributor