Datapath Vision RGB-E2S Dual DVI Capture Card
The VisionRGB-E2S, a stand alone PCI Express x4 plug in capture card, delivers extreme performance with 650MB/s transfer bus bandwidth providing a further improvement to the 480 MB/s of the VisionRGB-E2.
€ 1.851,00
- Ordered before 4PM same day shipping
- FREE shipping within EU
- Pricing Ex VAT
Datapath Vision RGB-E2S Dual DVI Capture Card
Board format | PCI Express x4 half size card, 110mm x 170mm PCI Express bus master with scatter gather DMA |
Connectors | Two DVI-I type connectors |
Maximum sample rate | 170 MHz analogue RGB or 165 MHz DVI. Analog modes up to 340MHz pixel clock can be captured using dual-pass sampling |
Maximum data rate | VisionRGB-E2 480 MB/s
VisionRGB-E2s 650 MB/s |
Video sampling | RGB: 24 bits per pixel/8-8-8 format |
Video capture memory | 64 MB (updated in real time). Triple buffered |
Analog RGB mode support | 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920 x 1080, 2048 x 1536,Custom modes |
DVI single-link mode support | 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920×1080, 1920 x 1200, and Custom modes |
HD modes | 1080p,1080i, 720p, 576p, 576i, 480p and 480i using a Component HD-DVI connector (HDCP not supported) |
Input mode detection | Automatic detection of input modes in hardware enabling the tracking of mode changes in the source signal |
Pixel transfer formats | RGB: 555, 565 or 888 pixels (24bit/32bit) pixels.
YUV 4:2:2, UYVY, YUY2, YVYU |
Update rate | User defined, captured frame rate will match the source providing max data rate (650MB/s is not exceeded)
Triple buffered to eliminate tearing artifacts. |
Video format options | Analog RGB plus HSync and VSync (5 wire)
Analog RGB with Composite Sync (4 wire) Analog RGB with Sync on Green (3 wire) DVI Single Link |
Operating system support | Windows® XP Professional, Windows® Server 2003, Windows Vista®, Windows® Server 2008, Windows® 7 (x86 and x64 Operating Systems), Windows® 8 and Linux (NOTE: Check Linux specific features with Sales) |
Power requirements | Max current at +3.3V – 0.25A.
Max current at +12V – 1.2A. Max power – 15 Watts. |
Operating temperature | 0 to 35 deg C. |
Storage temperature | -20 to 70 deg C. |
Relative humidity | 5% to 90% non-condensing |
Analog input range | Min 0.5Vpp Max 1.0Vpp |
Input offset | +/- 2V |
Hsync | 15kHz – 110kHz |
Vsync | No hardware limits, typically 25Hz – 200Hz for real signals |
Separate sync polarity | Positive or Negative. (Separate H & V sync, Composite Sync) |
Sync on green polarity | Negative |
Inputs | 75 Ohm terminated |
Downloads
Related Products....
Brand | |
---|---|
MPN |