INOGENI Toggle USB 3.0 Switcher
The Inogeni Toggle USB 3.0 Switcher is an excellent tool to leave set up in a room ready to go, the Toggle will automatically switch to a laptop when connected, and then when the laptop is disconnected, it will switch back to the computer in the room, a simple and easy way for allowing visitors with their own laptop to access the USB devices in a room without having to connect to hubs and multiple ports, just connect one cable and you are ready to go.
The toggle can be set to switch automatically as above, and you can also switch between computers manually with a push button, or remotely via RS-232 connection or GPI. The included 12 V power supply not only powers the Toggle, but it also enables the Toggle to power the connected USB devices.
- Switch Between 2 x USB 3.0 Host Systems
- 3 x USB Device Support
- Automatic, Manual, or Remote Control
- Can Power USB Devices
- Supports USB 2.0 and 3.0
- RS-232 and GPI Control
SPECIFICATIONS INOGENI Toggle USB 3.0 Switcher
|Dimensions (W x L x H)||70 x 83 x 23 mm|
|Power consumption||Up to 1.2A|
|Package content||2 x USB 3.0 Type-B to Type-A cables.
1 x terminal block connection.
1 x 12V power supply.
|Operating temperature||0° to 45° C (32° to 113° F)|
|Storage temperature||-40° to 105° C (-40° to 221° F)|
|USB host ports||2 x Type-B USB 3.0/2.0 compatible.|
|USB device ports||3 x Type-A USB 3.0/2.0 compatible.|
|Serial interface||Baud rate: 9600
For control purpose. See Serial communication protocol section for more details.
|Push-button||Physical switch to select host.|
Controlled by open-drain IO (short to ground) or driven IO.
Supported voltage range: 0V to +12V max.
|Device current limit|| 1.8A shared current limit for all 3 x USB device ports.
You can monitor current consumption through RS232 and our Control App.
|Operating systems||Compatible with any operating system
Windows 7 and above
macOS 10.0 and above
|Upgrade||Field upgradable through our INOGENI Control App.|
|Control||Automatic, manual or remote control.
Current configuration is saved onboard.
INCLUDED BY DEFAULT
- 2 x USB 3.0 Type-B to Type-A cables.
- 1 x terminal block connection.
- 1 x 12V power supply.