Lumantek VENTUS-A+ DTV Analyzer

Lumantek VENTUS-A+ DTV Analyzer

USB 2.0 MPEG STREAM ANALYZER / RECORDER / PLAYBACK

LUMANTEK’s DTV Analyzer can take in RF signals to analyze MER / POWER and analyze transport stream based on ATSC and DVB standard through ASI, RF, and IP(UDP).

KEY FEATURES 

Stream Analyzing

• Service
• PID
• Real-time Decoding (HEVC)
• Bitrate
• TR101290
• PTS-PCR / DTS-PCR

 

Event Trigger and Record

This optional function allows activation of analysis when an error occurs.

Control with USB 2.0

Use the DTV Analyzer and the PC to find out what was the problem.

SPECIFICATIONS

Demodulation	8VSB, OpenCable(64QAM, 256QAM)
Size	154mm x 76.8mm x 28.4mm
Power	USB 2.0 bus powered, no power supply required.
RF input connector	75Ω F-Type 1ea
ASI/SMPTE310M input connector	75Ω BNC 1ea
ASI/SMPTE310M output connector	75Ω BNC 1ea
ASI input bit-rate	0~108Mbps
ASI output bit-rate	0~108Mbps
SMPTE310M input bit-rate	19.392Mbps
SMPTE310M output bit-rate	19.392Mbps
RF Input Frequency Range	40 ~ 1002 MHz
RF Input Level	+7 ~ -84 dBm

 

TS Input	ASI, SMPTE310M
TS Output	ASI or SMPTE310M (Allow when input is ASI, SMPTE310M)
Analysis Mode	MPEG-2, ATSC, DVB, ISDB
7 Analysis Window Tab	Service, PID, Table, Service View, Bit-rate, TR 101 290, Table History
Recommended system requirements	– CPU : better than Intel Core i3 3.1GHz (Sandy Bridge) -RAM : better than 2GB -OS : Window 7 – Resolution : bigger than 1680×1050

INCLUDED BY DEFAULT

• Lumantek Ventus-A+ LMTA-US ( USB-2 In ASI/SMPTE In/Out, RF IN : ATSC, QAM-B Adaptor & TSoIP ) + DTV Analzyer