Datapath Fx4 Display Wall Controller – HDMI

Datapath Fx4 Display Wall Controller – HDMI

The Datapath Fx4 is a multi-faceted stand alone display controller that supports a choice of inputs, high bandwidth loop-through as well as 4 genlocked outputs in HDMI.

KEY FEATURES

• Infinite creative configurations
• UHD / 4K60 input, four HD 1080p outputs
• Rotates, crops, scales, mirrors and bezel corrects
• Multiple inputs for flexible connectivity (Dual HDMI1.4 or single
• DisplayPort1.2 inputs)
• HDCP1.4 support on all inputs and outputs
• True stand-alone operation: Fx4 can adapt to changes in inputs by
• adjusting all scale factors
• Network or USB interfaces allow platform independent control
  (MAC OSX 10.13 & later)
• Pre-load an image for use when signal is not detected

TECHNICAL SPECIFICATIONS

Dimensions	316x172x42mm (1.86kg)
Operating Temperature	0 – 35°C/ 32 – 96°F
Power Requirements	IEC switched and fused mains connectors 100-240V, 50/ 60Hz/ 35W
Video Input Connections	2x HDMI1.4 (2160p/ 30 or equivalent up to 297 MP/s
Video Output Connections	HDMI version: 4 x HDMI1.4 (1080p/ 60 or equivalent up to 165 MP/s) Loop-through (both versions): DisplayPort1.2 (locked to selected video input resolution)
Input Surface	8k x 8k maximum
Genlock Input	Analogue black-burst on dedicated BNC connector. Any video input (HDMI1, HDMI2, DisplayPort)
Control Interfaces	Dual 100BaseT Ethernet ports with inbuilt managed switch. USB2.0 Type B connector (full speed operation)
Firmware Support	Updates supported via USB and Ethernet connection
Storage	-20 to 70°C
Relative Humidity	5% – 90% non-condensing
Warranty	3 years

VIDEO

INCLUDED BY DEFAULT

• Fx4/H
• Power supply
• USB A to USB B cable
• 2x 19 inch brackets