DATAPATH Fx4 Display Wall controller – DisplayPort: One box, Four outputs, Millions of possibilities!
The Datapath Fx4 is a multi-faceted stand alone display controller that supports a choice of inputs, high bandwidth loop-through as well as 4 genlocked outputs in DisplayPort.
Specification of the Datapath Fx4 display Wallcontroller – DisplayPort:
|Operating Temperature||0 – 35°C/ 32 – 96°F|
|Power Requirements||IEC switched and fused mains connectors 100-240V, 50/ 60Hz/ 35W|
|Video Input Connections||DisplayPort1.2 (2160p/ 60 or equivalent up to 616 MP/s) 2x HDMI1.4 (2160p/ 30 or equivalent up to 297 MP/s|
|Video Output Connections||DisplayPort version: 4 x DP1.1 (1080p/ 60 or equivalent up to 165 MP/s)
Loop-through (both versions): DisplayPort1.2 (locked to selected video input resolution)
|Input Surface||8k x 8k maximum|
|Genlock Input||Analogue black-burst on dedicated BNC connector. Any video input (HDMI1, HDMI2, DisplayPort)|
|Control Interfaces||Dual 100BaseT Ethernet ports with inbuilt managed switch. USB2.0 Type B connector (full speed operation)|
|Firmware Support||Updates supported via USB and Ethernet connection|
|Storage||-20 to 70°C|
|Relative Humidity||5% – 90% non-condensing|