DATAPATH Fx4 Display Wall Controller – SDI
The Datapath Fx4-SDI offers the perfect solution for digital signage, staging and televised video walls. Delivering four SDI outputs and the ability to loop multiple units together, even the largest, most complex video wall installations are possible.
Specification of the Datapath Fx4 display Wall controller – SDI
Dimensions | 316x172x42mm (1.86kg) |
Operating Temperature |
0 – 35°C/ 32 – 96°F |
Power Requirements |
IEC switched and fused mains connectors 100-240V, 50/ 60Hz/ 35W |
Video Input Connections |
3G SDI (1080p / 60 or equivalent up to 148.5 MHz) DisplayPort1.2 (2160p / 60 or equivalent up to 616 MP/s) HDMI1.4 (2160p / 30 or equivalent up to 297 MP/s) |
Video Output Connections |
4 x 3G-SDI (1080p / 60 or equivalent up to 148.5 MHz) Loop-through: DisplayPort1.2 (locked to selected video input resolution) |
SDI SMPTE Standards |
SMPTE ST 2048 up to 60Hz SMPTE 274M up to 60Hz SMPTE 296M up to 60Hz |
Input Surface | 4096 x 2160p at 60 8k x 8k maximum |
Genlock Input |
Analogue black-burst on dedicated BNC connector. Any video input (SDI, HDMI, DisplayPort) |
Control Interfaces |
Dual 100BaseT Ethernet ports with inbuilt managed switch. USB2.0 Type B connector (full speed operation) |
Firmware Support |
Updates supported via USB and Ethernet connection |
Storage | -20 to 70°C |
Relative Humidity |
5% – 90% non-condensing |
Warranty | 3 years |
Downloads